Polystyrene Sandwich Panel also called EPS Sandwich Panel. The top & bottom Surface of this panel is Galvanized & pre-painted steel sheets, core material is polystyrene, it is formatted by laminating and pressing with 2 components PU glue. The sandwich panel is featured with temperature keeping, hot & sound insulation, anti water and fire resistant. It is widely used as the wall or roof for cold storage, industrial workshop, public building etc.
Alfa Panel System Comprise of Pre-Fabricated Composite sandwich panels with high density EPS Converted to Lamellar as core and profiled/ plain,colour coated galvanized steel / Galvalume Steel sheet facing on both sides, complete with joint sealants and fixing ancillaries.
Application: Panels System provides an one step solution in the form of insulated Walls and Roofing for easy and quicker construction of Various Roof and Wall of Factory Building, Hospitals,Storages,Exhibition Halls,Clean Rooms and Fall Ceiling Purposes.
EPS Insulation Provides Light weight,Heat insulation,Water resistant with EPS of density 12-16 kg/m3
Colour coated Sheet requirement for Eps panel will be 0.45-0.6mm.
Panels are available in Various length (upto 8 mtrs) and Standard effective width of 980-1000 mm and thickness 50-100mm
The panels are finished with tongue & groove jointing arrangement
Panels For Both Wall & Roof Available
*Main Technical Parameters
(support surface thickness is 0.5mm for both,EPS Density is 16Kg/m3)
Material - Galvalume Steel / Galvanized Steel / Aluminium
Thickness - 0.35mm to 0.70mm thick for Top skin and 0.35 to 0.50mm for Liner (Bottom Skin)
Colours - Bare Millfinish / off White/ Sky Blue / Royal Blue / Torres Blue / Mist Green / Cautfield Green / Brick Red / Shel Grey etc for Topskin and Pure White for Liner.